Let’s get some terms straight first so we tend to are both clear regarding what we are talking concerning. It’s a bit confusing however ancient “jigsaw puzzles” were originally cut out on a “scroll saw” which was called a “jigsaw”. Today, the term “jigsaw” refers to a hand-held transportable woodworking power tool whereas the term “scroll saw” refers to a stationary woodworking machine. Another method to seem at it that in the case of a jigsaw, the tool is dropped at the workpiece and within the case of the scroll saw the workpiece is dropped at the machine. Another name for a jigsaw is “sabre saw.”

I’ve been using jigsaws longer than I’d wish to admit. I found the primary one lying around my dad’s woodworking search within the basement of my childhood home. A few years after that, I purchased a cheap one from Sears. That jigsaw gave me the quick usefulness that all jigsaws provide but there have been persistent and annoying issues without apparent

solutions: First, The blades had no guides so they would perpetually wander away from the cut line, particularly once I was making an attempt to track curved pencil lines. Second, when cutting curves in thick material, the jigsaw blade would bend toward the outside of curves. Third, early jigsaws failed to have orbital pendulum action and so they’d load up and burn in thick materials. Changing blades required a screwdriver and you had to be careful not to lose the set screw.

ONE. Position yourself comfortably, with legs apart, positioning the metal base, or shoe, on prime of the fabric to be cut and facing the cut you would like to make. A fairly low position (slightly above knee height) ensures that you have a good view of the blade and also the cutting line.

TWO. Hold the grip firmly and, with the blade a few millimetres off from the work piece, press the facility button and begin your cut.

THREE. Apply mild pressure when cutting and do not force the blade. The tool will do the work for you and forcing the cut can bind the saw. The blade of the jigsaw moves vertically at a very high speed and, if forced forward, the blade can snap off.

FOUR. When creating a curved cut, follow the road and regulate the speed of your cut in keeping with what the work piece material can permit.

FIVE. When a sleek straight cut is needed, you’ll need a guide for the saw to follow. Due to its small size, the jigsaw blade will wander in the cut if not guided. The saw guide can be a simple straight piece of wood clamped at each ends onto the work piece. Over and higher than the mild push forward, you’d currently additionally would like to firmly push the shoe of the tool against the guide. Some power jigsaws come with an adjunct called a rip-guide. Provided that the sting of your work piece is straight and you are doing not would like to chop too way away from the edge, they work fine.

SIX. Should you need to prevent midway through the cut, let the blade come back to rest before lifting the tool from the cut. Lifting the tool with the blade still running can cause the blade to bend when hitting the high of the work piece on the down stroke.
SEVEN. On completion of the cut, let the blade return to rest before laying the tool down.